自行車-安裝電池控制盒及條燈

用螺絲起子拆開蓋子, 裝入3顆3號電池(AA), 然後鎖好, 另外,
用膠帶將開關以及IR接收孔貼上, (紅色箭頭所指區塊),
做一些程度防護, 可以避免雨水直接噴進去...
(二代控制盒內的控制板,已做了防水膠處理, 不過淋了雨還是
要擦乾, 避免電池盒金屬部份生鏽)
(use 3 pcs of AA battery and use tape cover on the mark area for water proof)
(2nd generation control board have coating with silicon gel for water proof, however, when exposed to the rain, need to dry the box to avoid rustiness)
將包裝內附的束線帶, 穿過控制盒扣...
(control box tied with a cable tie) 注意束線帶的方向, 凸桿在外面才是正確的
(make sure the correct direction of cable tie)
紅色箭頭所指的地方, 凸桿壓下後, 就可以鬆開束線帶
(press the sticks, cable tie will be released)

用可調式束線帶, 把控制盒扣在座墊下
(Tied the control box under the seat)

扣好後的樣子 (the way you see)
拜託腳踏車店老板, 給幾條小束帶把線固定好
(use cable tie fix the cable)



二代條燈, 使用較柔軟材質, 可以繞圈圈.....
(with FPC material, more softer......)


附贈汽車專用等級泡棉雙面膠, 可以牢牢的貼在後叉上...
(with double layer adhesive, can stick more strongly on frame)

撕掉條燈背面雙面膠保護膜, 把條燈貼在後上叉
(adhesive the strip light on the frame with twin adhesive)


條燈故意貼斜斜的, 晚上騎車時, 讓後面和側面來車都看得
到發光的條燈, 更安全一些...
(adhesive the strip light crooked)

側面看得到發光的條燈 (strip light is shining at side view)

後面也是看的非常清楚 (it's very shining at backside)